Preference Classic Laminate – Blackbutt

Preference Classic Laminate in Blackbutt brings one of Australia’s most recognisable hardwood décors to a hard-wearing 12.3mm plank — a blackbutt plank laminate flooring board whose warm brown ground and straight, even grain read the way a freshly finished hardwood floor should. The 65% gloss surface lifts the timber tone under light, while the micro-bevel on all four sides gives every plank its own defined edge rather than letting the floor flatten into a single sheet. Beneath the décor sits an FSC-certified HDF core and an AC3 wear rating built for the daily traffic of a family home.

At 1215×125mm the board is a classic domestic width, which makes it an easy fit for living areas, bedrooms and hallways in both contemporary and traditional interiors — the Blackbutt tone sits comfortably beside white walls, warm-metal fixtures and neutral joinery. The Clic angle-click system floats over an existing subfloor, and the range is compatible with in-slab hydronic heating. Available to view at Belantti’s Adelaide showroom.

• 12.3mm laminate, AC3; FSC HDF core
• Plank 1215×125mm; 65% gloss; micro-bevel 4 sides
• Clic angle-click floating; in-slab hydronic heating only
• E1 emissions; lifetime structural + 20-year residential wear warranty

Specifications

• Size / Format: 1215×125mm plank — 12.3mm thickness
• Also suits: bedrooms, hallways, living areas, contemporary and traditional interiors
• Features: AC3 commercial-moderate wear rating; FSC-certified core; E1 low emissions

Browse the full Laminate Flooring page.