De Marque Oak – Raw (Herringbone)

De Marque Oak – Raw (Herringbone) is an oak engineered timber flooring cut into 600×120mm blocks and set in herringbone, with the timber left as close to untouched as the range goes. Raw is exactly that: pale, unstained European Oak in soft wheat and bone tones, its medullary rays and small tight knots fully visible, lightly brushed so the grain sits slightly proud of the surface. A matte European PU seals it without warming or yellowing the colour. Choose 15mm with a 4mm wear layer or 21mm with a 6mm wear layer, both thick enough to be sanded back in future.

Herringbone gives living areas, entries and hallways a sense of craft that straight boards cannot, and the raw pale tone keeps the pattern quiet enough for minimalist and Scandinavian interiors. It reads beautifully with limewash, pale plaster, linen and stainless or brushed nickel details. Parquetry is direct-fix adhesive only, and suits in-slab hydronic heating. See it in person at our Adelaide showroom in Dry Creek.

• Engineered European Oak, A/B/C grade
• Herringbone block 600×120mm; chevron and 240–300mm wide plank also available in this range
• 15mm (4mm wear layer) or 21mm (6mm wear layer); matte European PU, micro-bevel
• Direct-fix adhesive only (parquetry); in-slab hydronic heating only; P3 slip rating
• 25-year structural + 20-year residential wear warranty

Specifications

• Size / Format: 600×120mm herringbone parquetry blocks, 15mm or 21mm thick
• Also suits: dining rooms, studies, bedrooms, Scandinavian and minimalist interiors
• Features: thick 4mm or 6mm re-sandable wear layer; light-brushed matte European PU; unstained natural oak

Browse the full Engineered Timber Flooring page.